The Baja Designs S2 Pro LED Light offers an incredible 2,245 lumens out of a tiny 3 inch x 1.75 inch housing; the S2 Pro is quite literally the brightest LED light ounce for ounce on the market. The two lens combo allows you to see wide when going slow/turning with the flood lens and the spot lens helps see farther down the trail when going faster. We love this light for easily mounting on the Trailbound chainsaw rack.
The light only draws 24 watts so your electrical system will barely know it’s there. This LED is perfect for extending your rides and getting you out of the woods when things get hairy! A Limited Lifetime Warranty from Baja Designs is included for the ultimate in-purchase protection.
Light Features
—2245 Lumens
—5000K Daylight – Less Rider Fatigue, Natural Color
—2 Lenses: Wide + Spot
—uService – Replaceable Lenses And Optics
—Limited Lifetime Warranty – Complete Purchase Protection
—MoistureBlock – Waterproof, Rain Proof, Submersible
—Bezel Material: Billet Machined Aluminum
—Housing Material: Hard Anodized and Powder Coated Cast Aluminum
—Lens Material: Clear Hard coated Polycarbonate
Light Spec
—2.93”W x 1.76”H x 1.68”D
—8 ounces
—Wattage: 23.460W
Bike Fitment
—Comes with universal male 2 pin waterproof connector that can be wired into bikes with DC wattage.
—Also included is a 4 pin adapter to fit 2018-2023 TPI KTM/Husky/Gas Gas. Works for both high/low: EXC,FES, ES and on/off: XC-W, XCF-W, XFW, TE, FE, FE-W, EC, EW. Other MX, XC style bikes will need to add the plug and play OEM on/off switch or an aftermarket switch.
—To connect to a newer TBI bike an aftermarket "2024 KTM Headlight Plug Adapter" would need to be purchased (not from trailbound) that fits the included KTM 4 pin adapter mentioned above.
—2017-2019 Carbureted KTM/Husky with a Stator Output of 100W AC (Peak) will not work unless you purchase a "KTM Auxiliary Wiring Harness" (not from trailbound) that gives you DC power directly bolted into from the battery.
—When adding a light to any MX/XC bike a relay in the harness is recommended to prevent accidentally leaving the light on.
Bike Mounting
—Comes with adapter mount to bolt into Trailbound Chainsaw Rack in any of the slots on the rack.
—A small hole can be drilled into the number plate or elsewhere to mount the light.
Disclaimer/Warnings
—Buyer is responsible for ensuring that it uses the products (and its vehicle) in accordance with all applicable laws, regulations, guidelines, and standards of care. Buyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines. Buyer is solely responsible for (and will indemnify and hold Bestop harmless for) any claims, losses, damages, fines, fees, costs, or other amounts arising out of Buyer’s non-compliance with these provisions.
—Baja Designs California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The Baja Designs S2 Pro LED Light offers an incredible 2,245 lumens out of a tiny 3 inch x 1.75 inch housing; the S2 Pro is quite literally the brightest LED light ounce for ounce on the market. The two lens combo allows you to see wide when going slow/turning with the flood lens and the spot lens helps see farther down the trail when going faster. We love this light for easily mounting on the Trailbound chainsaw rack.
The light only draws 24 watts so your electrical system will barely know it’s there. This LED is perfect for extending your rides and getting you out of the woods when things get hairy! A Limited Lifetime Warranty from Baja Designs is included for the ultimate in-purchase protection.
Light Features
—2245 Lumens
—5000K Daylight – Less Rider Fatigue, Natural Color
—2 Lenses: Wide + Spot
—uService – Replaceable Lenses And Optics
—Limited Lifetime Warranty – Complete Purchase Protection
—MoistureBlock – Waterproof, Rain Proof, Submersible
—Bezel Material: Billet Machined Aluminum
—Housing Material: Hard Anodized and Powder Coated Cast Aluminum
—Lens Material: Clear Hard coated Polycarbonate
Light Spec
—2.93”W x 1.76”H x 1.68”D
—8 ounces
—Wattage: 23.460W
Bike Fitment
—Comes with universal male 2 pin waterproof connector that can be wired into bikes with DC wattage.
—Also included is a 4 pin adapter to fit 2018-2023 TPI KTM/Husky/Gas Gas. Works for both high/low: EXC,FES, ES and on/off: XC-W, XCF-W, XFW, TE, FE, FE-W, EC, EW. Other MX, XC style bikes will need to add the plug and play OEM on/off switch or an aftermarket switch.
—To connect to a newer TBI bike an aftermarket "2024 KTM Headlight Plug Adapter" would need to be purchased (not from trailbound) that fits the included KTM 4 pin adapter mentioned above.
—2017-2019 Carbureted KTM/Husky with a Stator Output of 100W AC (Peak) will not work unless you purchase a "KTM Auxiliary Wiring Harness" (not from trailbound) that gives you DC power directly bolted into from the battery.
—When adding a light to any MX/XC bike a relay in the harness is recommended to prevent accidentally leaving the light on.
Bike Mounting
—Comes with adapter mount to bolt into Trailbound Chainsaw Rack in any of the slots on the rack.
—A small hole can be drilled into the number plate or elsewhere to mount the light.
Disclaimer/Warnings
—Buyer is responsible for ensuring that it uses the products (and its vehicle) in accordance with all applicable laws, regulations, guidelines, and standards of care. Buyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines. Buyer is solely responsible for (and will indemnify and hold Bestop harmless for) any claims, losses, damages, fines, fees, costs, or other amounts arising out of Buyer’s non-compliance with these provisions.
—Baja Designs California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov